Automatic changer plastic recycling heat double stage die head Hydraulic Screen Changer Extruder Die Head

Selling Units: Single item
Single package size:  1X1X1 cm
Single gross weight: 68.000 kg
Package Type: According your requirement
Lead time

Supporting equipment III: dehydrator
The structure of the dehydrator is simple, similar to that of the household dryer, and its working method is also similar. It mainly uses the centrifugal force of high-speed rotation to remove the water from the broken plastic in the drum.
Supporting equipment IV: dryer
The broken, washed and dehydrated plastic still has certain moisture. The function of the dryer is to send it through the feeding port into the air duct with hot air circulation, so that the moisture in the material can evaporate and the plastic can be dried to meet the needs of the extrusion granulation process.
Supporting equipment V: exhaust extruder
The function of the exhaust extruder is to re-mix, heat and melt the broken plastic which has been broken, cleaned and dried by the extruder, and then extrude and cut the particles
Because the source of waste plastic products is relatively complex, there are many types of mixture, and there are many volatile substances, moisture and other components in the mixture, so the exhaust extruder is more suitable.
The exhaust extruder is used for mixing molten waste plastic, and the shape of the material is special, so the screw forced charging is used; A filter screen is added in front of the barrel, and the molten material is granulated after being extruded by a perforated plate. Waste recycling is to extrude the strip, cool and shape it in the water tank, and then cut the grain.