Under water pellet making granulator for plastic waste material recycling purpose

(1) Pay attention to the temperature change of the fuselage at any time. When touching the strip with a clean hand without touching it, it should be heated immediately. It is normal until the note touches hands.
(2) When the bearing part of the reducer burns or is accompanied by noise, it shall be shut down for maintenance in time and supplemented with oil.
(3) When the bearing parts at both ends of the main engine bearing room burn hands or make noise, stop the machine for maintenance and add grease. During normal operation, the bearing chamber shall be installed every 5-6 days
Add butter once.
(4) Pay attention to find out the operation law of the machine; For example, if the machine temperature is high or low, and the speed is fast or slow, it can be handled in time according to the situation.
(5) When the fuselage is unstable, pay attention to check whether the clearance of the coupling fitting is too tight, and adjust it in time.